Lets hear it guys, what are your winter goals/projects? Anything awesome on the horizon or doing a total rebuild?
Lets hear it guys, what are your winter goals/projects? Anything awesome on the horizon or doing a total rebuild?
'04 Ram STS Turbo
'06 Magnum SRT8
nada
11.59 @ 118 on a 150 shot
Fastest Stock Internal 3rd GEN Hemi Ram
Click Here for my compilation video
"The plan" (best laid plans and so on...) is to cam and eagle top end the truck engine along with gutting the interior and putting in new carpet with the 4th gen seats and console to go along with the 05 wheel swap I already did, then basically do the same thing to the Magnum lol.
2003 Hemi Lonestar, 2005 Magnum R/T, 2006 Charger R/T (RIP)
Gathering the parts needed an do a front mount setup along with fixing up a bunch of little odds an ends(mostly interior related) an hopefully a track visit, coming up on 4 yrs since my last track visit.
2004 Rcsb HEMI 13.4@99
Well get my GMC so I can drive it around without scrapping on everything. Quiet it down so I can actually drive it and use it.
Focus on building the white truck more, shoot for a 10.9 NA
2014 RAM 1500 Express QC 2wd Hemi
5.7 Stock Block
1/4 - 12.18 @ 110.15 NA
1/8 - 7.74 @ 89.06 NA
426 Stroker
1/8 - 7.16 @ 95.79 NA
2000 GMC Sierra 1500 RCSB 2wd - ERL 454 LS2 Dry-Sleeve powered drag truck...
SOLD - 2007 Dodge Ram 1500 QC 2wd Hemi
1/4: 12.63 @ 104.92 NA
1/8: 7.98 @ 84.83 NA
Be able to figure out what the weird sounds are and hope it's not my lifters eatting my cam. Then if it's not eatting my cam get that tuner guy from Texas some logs and finally drive this thing. Was also hoping to start an LS build for my other 3rd gen of the Chevy kind.
Kris-2005 Rumblebee, Greene Tuned & Inertia Cam and heads, stalled, geared and other stuff to make it go chopidy chop chop when it starts
05 RCSB Hemi Ram, build in progress
03 QC Hemi Ram
https://www.youtube.com/watch?v=RQ72xXx5dck
Back to stock.
Mario I have an oil pan with a drain welded into it already if ur interested. Its just holding a bunch of bottle rockets from last 4th of July lol.
No winter goals for my truck, bought a new to me boat and am in the process of restoring it. Hoping to have it back in the water by March.
In the process of building a roll cage, tube front end and re doing the twin turbo setup. Also wiring in the Ms3-pro.
Mac Chapman
TWIN 66MM TURBO 392 STROKER W/ 727 TORQUEFLITE