Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: D150 Drag Project

  1. #1
    Join Date
    Mar 2010
    Location
    Orlando
    Posts
    1,712

    Default D150 Drag Project

    Soo... hopefully I will finish this project.
    Since a little girl is on the way it made more sense to get a family/work truck so I put the 2012 back to stock and traded her in on a 2016 Nissan Frontier.

    That being said I now have a shelf full of awesome parts for Hemi's and Rams. I've decided to turn the D150 into a Street/Strip Beast.
    I'm Gonna drop the Built 5.7 Hemi in her along with the Built 545 I have. Also scored a Dana 60 today which will help put that power to the ground. I hope to do a full triangular 4 link with coilovers for the rear suspension but have not completely figured that out yet.

    This past weekend i started tearing it apart. Pulled rear bumper and disconnected everything to be able to remove the bed so I can start the rear suspension and axle parts.
    Any ideas for getting coilovers and suspension parts cheapp. I'm all ears.
    Attached Images Attached Images
    __________________
    Modern Performance Engineering
    Had 2002 4.7 RCSB 14.2
    Had 2011 RCSB 12.41
    Had 2012 RCSB 13.99
    Had 2016 QCSB 13.0
    2011 Drag Truck....

  2. #2
    Join Date
    Mar 2009
    Location
    Broken Arrow, OK
    Posts
    7,091

    Default

    Should be a cool build.

    P.S. you sure go through alot of trucks!
    '04 Ram STS Turbo

    '06 Magnum SRT8



  3. #3
    Join Date
    Mar 2009
    Posts
    2,106

    Default

    Thats what i was thinkin! Just finish something man lol
    Will be cool no doubt
    Wheatley Trick Turbo

  4. #4
    Join Date
    Mar 2010
    Location
    Orlando
    Posts
    1,712

    Default

    Haha.. I do go through trucks.. partly because they were work and play trucks at the same time.
    __________________
    Modern Performance Engineering
    Had 2002 4.7 RCSB 14.2
    Had 2011 RCSB 12.41
    Had 2012 RCSB 13.99
    Had 2016 QCSB 13.0
    2011 Drag Truck....

  5. #5
    Join Date
    Mar 2009
    Location
    Broken Arrow, OK
    Posts
    7,091

    Default

    Quote Originally Posted by Aught6 View Post
    Thats what i was thinkin! Just finish something man lol
    Will be cool no doubt
    Whoa whoa whoa I didnt say THAT.
    I shall not throw rocks while in this glass house
    '04 Ram STS Turbo

    '06 Magnum SRT8



  6. #6
    Join Date
    Mar 2010
    Location
    Orlando
    Posts
    1,712

    Default

    Dropped the Dana 60 off today to get new ends and axles today.
    __________________
    Modern Performance Engineering
    Had 2002 4.7 RCSB 14.2
    Had 2011 RCSB 12.41
    Had 2012 RCSB 13.99
    Had 2016 QCSB 13.0
    2011 Drag Truck....

  7. #7
    Join Date
    Mar 2009
    Location
    Waco, TX
    Posts
    3,249

    Default

    looking forward to the progress. keep the pics coming

  8. #8

    Default

    Good luck Josh.
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

  9. #9
    Join Date
    Mar 2010
    Location
    Orlando
    Posts
    1,712

    Default

    Ordered a full spool... this is gonna be fun.
    __________________
    Modern Performance Engineering
    Had 2002 4.7 RCSB 14.2
    Had 2011 RCSB 12.41
    Had 2012 RCSB 13.99
    Had 2016 QCSB 13.0
    2011 Drag Truck....

  10. #10
    Join Date
    Mar 2010
    Location
    Orlando
    Posts
    1,712

    Default

    Fuel Cell came in..
    Attached Images Attached Images
    __________________
    Modern Performance Engineering
    Had 2002 4.7 RCSB 14.2
    Had 2011 RCSB 12.41
    Had 2012 RCSB 13.99
    Had 2016 QCSB 13.0
    2011 Drag Truck....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •