Page 31 of 31 FirstFirst ... 21293031
Results 301 to 309 of 309

Thread: Tinkering again

  1. #301

    Default

    Looking for a tuner that can tune my 05 turbo 392 Hemi Ram. It must be very street-able tune. The truck will be driven on the street daily and driven to the track on the weekends.
    Last edited by ghost03hemi; 05-13-2019 at 11:53 PM.
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

  2. #302
    Join Date
    Mar 2009
    Location
    Waco, TX
    Posts
    3,250

    Default

    Quote Originally Posted by ghost03hemi View Post
    Looking for a tuner that can tune my 05 turbo 392 Hemi Ram. It must be very street-able tune. The truck will be driven on the street daily and driven to the track on the weekends.
    Can't go wrong with Sean, HemiFever. Or Jay Greene, GreeneRacing.

  3. #303
    Join Date
    Dec 2009
    Location
    Mount Pleasant, TX
    Posts
    4,264

    Default

    If you want me to do the tuning for you just let me know.

    jmgak47@gmail.com

    Have tuned many turbo Rams.

    Jay
    2014 RAM 1500 Express QC 2wd Hemi

    5.7 Stock Block
    1/4 - 12.18 @ 110.15 NA
    1/8 - 7.74 @ 89.06 NA

    426 Stroker
    1/8 - 7.16 @ 95.79 NA

    2000 GMC Sierra 1500 RCSB 2wd - ERL 454 LS2 Dry-Sleeve powered drag truck...

    SOLD - 2007 Dodge Ram 1500 QC 2wd Hemi
    1/4: 12.63 @ 104.92 NA
    1/8: 7.98 @ 84.83 NA

    Quote Originally Posted by DaKing View Post
    "It rubs the oil on its piston.."

  4. #304

    Default

    Thanks Jay. I appreciate that.
    The truck is up on jack stands for the new fuel system install. Actually thinking of removing the 6.1 heads, Ritter intake manifold, stage 4 HHP turbo cam, 80lb(92lb@58psif) injectors and the turbo system off of the 392. De-modding the 392 or maybe installing the 348. Once I figure out what to do....
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

  5. #305

    Default

    392 lost spark. Been troubleshooting to find the problem. Found no problem other than no signal coming from the pcm. One step forward and two steps back.
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

  6. #306

    Default

    Found it! The pcm ground signal wire to the coils and the injectors. The wire had slipped out of it's crimp at the pin plug on the wiring harness plugging into the pcm. Would get a good reading when the plug was facing me. Once I turned the plug like I was plugging it back into the pcm, then got a bad reading. Re-crimped the wire onto the terminal, re-assembled the harness plug and the truck started up.
    Dang, that was hard to find....
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

  7. #307
    Join Date
    Mar 2009
    Location
    Waco, TX
    Posts
    3,250

    Default

    Gremlins like those are never fun... Glad you got it firgured out. Lets see a burn out!!!

  8. #308

    Default

    Ha,ha! There's some other things that have to get figured out like wiring up the Hellcat fuel pump, fans, pumps, ect, ect. Swapping back to an 84mm tb. Believe the 90mm BBK throttle body was causing some of the tuning problems. Still might have to pull the 80lb injectors(92lbs@58psif) and stage 4 turbo cam to get it to drive good on the street. We'll see. No rush.
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

  9. #309

    Default

    Fuel system install.
    Attached Images Attached Images
    05 RCSB Hemi Ram, build in progress
    https://www.youtube.com/watch?v=pfNYY-GNIgs

    03 QC Hemi Ram
    https://www.youtube.com/watch?v=RQ72xXx5dck
    Back to stock.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •