PDA

View Full Version : split second cam tuner

fulson4
03-26-2010, 07:45 PM
looking for a split second cam tuner.
sldhemi
03-26-2010, 07:50 PM
qdaddy had one on here not long ago... if you dont mind me asking, what do you want that for?
fulson4
03-26-2010, 08:31 PM
um kinda long story. I guess to make it short to help with my map voltage so that my transmission line pressure wont be too low. using the resistor in the trans and line pressure still isn't high enough.
ramcrazy
03-27-2010, 02:44 AM
I got Q daddys..... They are popular right now....
daytonahemi392
03-27-2010, 02:47 AM
How does the cam tuner work again? I thought it only worked at idle? I like this idea though, you would have to adjust your tune for the added fuel, but you should end up with more line pressure.
ramcrazy
03-27-2010, 02:52 AM
My cam with over lap needs the tuner to help the MAP out.....
fulson4
03-27-2010, 04:23 AM
yeah sean told me about your cam, yours is a lil bigger than mine. lol do you wanna sell your cam tuner?

My cam with over lap needs the tuner to help the MAP out.....
sldhemi
03-27-2010, 04:31 AM
Couldn't you just put a bigger resistor on the trans?
fulson4
03-27-2010, 05:59 AM
i've bumped the resistor up twice already. And i also need it to help with idling issues as well.

Couldn't you just put a bigger resistor on the trans?
ramcrazy
03-27-2010, 12:00 PM
What is your idle vaccumm?
Hemidup
03-27-2010, 05:44 PM
Mike, Your SMT6 can do the same as a cam tuner. What size resistor are you using for the trans?
fulson4
03-27-2010, 07:05 PM
to be honest with you i'm not 100% sure which resistor is in there now. I am running the one you told me to when I put in the transmission.

Mike, Your SMT6 can do the same as a cam tuner. What size resistor are you using for the trans?
fulson4
03-27-2010, 07:10 PM
i'll have to look at the logs I think its around 8"

What is your idle vaccumm?
ramcrazy
03-28-2010, 12:56 AM
i'll have to look at the logs I think its around 8"
Makes sense.Mines at 7
fulson4
03-28-2010, 02:12 AM
I hope the cam tuner works out!

Makes sense.Mines at 7
ramcrazy
03-30-2010, 03:02 AM
I hope the cam tuner works out!

Got it today so we shall see...I will let you know what we get from it...
fulson4
03-31-2010, 03:30 AM
I found the reciept and package for the resistor I'm running a 1.5k 1/2w resistor.

Mike, Your SMT6 can do the same as a cam tuner. What size resistor are you using for the trans?
ramcrazy
04-01-2010, 12:38 AM
Im hearing good things about you today.......Man I hope you found the problem....
fulson4
04-01-2010, 06:50 AM
I hope we both get the tuning ironed out. i know mine has alot of power with my current setup its gone sideways in my neighborhood shifting into 2nd even left a lil tread parking at my soccer game lol. off subject what weight oil are you running?
ramcrazy
04-01-2010, 11:48 AM
right now a special break in oil for 1000 miles. Then 15-40 diesel marine
amsoil.....
fulson4
04-02-2010, 10:29 PM
saw the video looks like you got your truck idle situated nice video. I just posted one up of mine I recorded yesterday.
fulson4
04-06-2010, 06:30 AM
hows the truck running with the cam tuner?
ramcrazy
04-06-2010, 11:53 AM
Going good so far.We have limited time Sean and I can work on it.
It idles good,no stalling at a light or stop.We are having some issues at light load driving. 1500-1800 rmp just doing 30-35 mph it is jerky.Same with
anytime your just going along in a high gear and cruising. WOT
is in the 11 range yet but we are working our way to that.....