Need part of wiring harness and a PDC

[hemi1569]

I am looking for the 10 pin grey plug that goes into the bottom of the power distribution center. I need the plug and the wires snipped back about 3 inches. Also anyone have a spare power distribution center? I need one let me know how much you want for it.

[adamsredlines]

If you find a complete harness I would be interested in a few connectors off of it....

[Hemi345]

If you talking about the Injector/coil connection part of the harness I have that

[hemi1569]

This is directly under the fusebox. My fused ignition run/start wire rotted off and left me by the side of the road. Spent a half a day with a meter:puke: but finally found it. It was corroded so bad it weakened the pin in the pdc enough so when i fixed the wire and plugged it back in the pin snapped in half.:cry:
Basically i am looking for either a beat up harness, one that i can cut the connector back a couple inches and solder/heatshrink the connections. I am looking for a good pdc though, so if anyone knows where one is i will pay for that too...