THE LIST...help a guy out!

[adamsredlines]

Ok folks, here’s what I’m looking for to get goin on my swap….have a few bucks now and will have some more money to play with this weekend, so if yall have any of this and wanna cut some deals, LMK…

NEED:
Underdrive pulley/damper (ATI Superdamper or Summit damper)
Shorty headers (prefer ceramic coated…but interested in uncoated for right price)
6.1 pushrod/spring setup for 5.7
Alternator overdrive pulley
5.7 engine wiring harness (for sensors/accessories)


NO LONGER NEED:
Power steering pump
Alternator
Stock injectors
EGR Blockoff Plates

I’ll try to edit the list as I think of stuff/acquire stuff, but any help or leads on this stuff would be appreciated.

[otter1363]

I have stock injectors and 6.1 springs. Pretty sure the rods I have are stock 5.7 -

[viperkota]

i have a set of stock injectors too. plus if needed or wanted i have a set of 5.7 intake and exhaust pushrods a TWO non mds lifters.

i might be able to help with a wiring harness...but ill let you know.

also swap over as many sensors as you can from the 4.7 to the 5.7. right now i know the oil pressure sender and the coolant temp sensor will swap over...so that 2 less connectors to swap.

[Onebadbee]

underdrive pulley you looking for a factory one if so ill ship it out free on my costs

[austin4.7]

using stock injectors w/ turbo setup?? get some srt4 ones they are cheap and mount right up. are you sure the altenator and power steering pump you have wont work??

[Hemi345]

Stock injectors---------- CHECK 20K miles
Alternator -------------- CHECK used 50K miles
5.7 engine wiring harness---CHECK 20K miles
EGR Blockoff plates----- FOR the intake manifold YES BUT Im keeping the one for the Heads Ill trace it out for you on cardboard if you get any of my other crap then you can have someone make it for you out of 1/4 steel thats all it is

[Spedly]

I might have some manley 6.1 pushrods laying around I'll check next time I'm at the shop.

[adamsredlines]

Stock injectors to get it up and running good before I put the turbo on. Alternators are different, I comapared a hemi one to mine yesterday and they are different....haven't checked the power steering yey.

Badbee-I would take either....I just wanna get it running tight now and can upgrade later, so lmk.

Hemi345-shoot me a PM with some prices.

[dr.ruff84]

I have some 6.1 springs and manley rods i will let go for 90.00 shipped

[adamsredlines]

Ruff-are they 5.7 or 6.1 pushrods?

[viperkota]

the 4.7 power steering MIGHT fit...i know yall are saying the pulley offset is different between the truck and car engines...the PS pump will bolt up...if yalls bolts to the head like the 4.7 but i cant use mine because the pulley offset is different.

[adamsredlines]

I will check sometime, its still attached to the lines so when I get the motor mounts and set the block in and see if kit works

[dr.ruff84]

I believe they are 6.1.

[adamsredlines]

Any way you can verify?
If so I am interested...

[Onebadbee]

pm me your address adam and ill get it out to you

[adamsredlines]

You are the man!

[adamsredlines]

Stock injectors---------- CHECK 20K miles
Alternator -------------- CHECK used 50K miles
5.7 engine wiring harness---CHECK 20K miles
EGR Blockoff plates----- FOR the intake manifold YES BUT Im keeping the one for the Heads Ill trace it out for you on cardboard if you get any of my other crap then you can have someone make it for you out of 1/4 steel thats all it is

Money sent. Thank you sir!

[Hemi345]

Got it this morning It will ship with USPS if thats ok

[adamsredlines]

That's fine by me