6500rpm 1-2 shifts in drive with superchips

[hemi1569]

http://www.streetfire.net/video/6500-12-shift_740132.htm
http://www.streetfire.net/video/6500-12-shift_740134.htm

:peelout::peelout::peelout:

[jmgak47]

Damn! Plz tell me you have 6.1 exhaust springs in your truck??

[FlyinRyan]

Damn! How'd you pull that off, I thought SC could only go up to 6200???

[05DodgeDakota]

I'm jealous

[hemi1569]

I don't know why it is shifting that high, i have it set to shift to second at 46.2 mph. My shift's are maxed out at 6200 with a 6500 rev limit. I am fixing to get some better valve springs, maybe a set of comps a member has for sale on here.

[05DodgeDakota]

Well I still can't get mine to shift above 6,000 without sounding like a manual cause of that stupid lag.

[RandTx]

Yessir. good chit there. :)
Almost too much though, it slows you down a bit if you kiss the rev limiter. Shift might feel stronger and more solid but slower ETs if the rev limiter actually clips the rpm during a shift.

SC uses a start of the shift as the shift point so the rpm will go higher than set point during the shift esp the 1-2 shift. the more power, the greater the gear reduction and smaller the tire size the higher it will go over set point.
AKA why superchips needs a 6800 rpm rev limit to be able to use that 6200 rpm shift point on more modified trucks with gears and DR's