1/8 times

[Rumblebee2655]

Anyone have any 1/8 mile times to give me an idea of how I'm doing, because i went to the track for the first time today! I do have to say i need more practice on the tree, i pulled a 8.947 with a r/t of .578, that tells me with a good launch I'm capable of about 8.3-8.4. I think that is damn good for a 5020lb truck turning factory 20's. Oh and please no BS times either

[zemog255]

Reaction time has nothing to do with the times you run. The clock doesn't start until you move. What mods do you have and whats the rest of your setup that will tell us how well you ran. Also what was your 60ft time?

[Rumblebee2655]

That's what i thought but some guy at the track convinced me that the r/t was included in the E.T. "dumb ass" anyway 60ft time ... no 60ft time that i see, i have r/t-.578, I1-1.993, I2-5.781, E.T. 8.947 @76.508MPH. Oh lets see heads, cam, intake, exhaust, 4.56, headers, valve body, high stall tc, hemifever tune, and about 200lbs of stereo equipment. No weight reduction whatsoever

[coley 1334]

are u a 4x4? ciz i ran a 9.2 on 22s stwith a efan and a SC and i'm a 2wd

[Hemidup]

That's what i thought but some guy at the track convinced me that the r/t was included in the E.T. "dumb ass" anyway 60ft time ... no 60ft time that i see, i have r/t-.578, I1-1.993, I2-5.781, E.T. 8.947 @76.508MPH. Oh lets see heads, cam, intake, exhaust, 4.56, headers, valve body, high stall tc, hemifever tune, and about 200lbs of stereo equipment. No weight reduction whatsoever

1.993 is your 60' time. 5.781 is your 330' e.t.

[LETHAL HEMI]

give us more detail? what cam do you have( specs), what converter? what heads? are they big valve or just ported

[Hemidup]

damn how much does your truck weigh? you should be in the low 8s

He stated 5020# with 20's. Don't know if he's stock or slightly modded?

[LETHAL HEMI]

He stated 5020# with 20's. Don't know if he's stock or slightly modded?

oh thats right but he said he has cam, heads, 4.56, tuned by hemifever

[Hemidup]

oh thats right but he said he has cam, heads, 4.56, tuned by hemifever

Missed that. Needs to better his 1.993 60' times then.

[dr.ruff84]

what kind of heads, what kind of cam? 4x4 im assuming

[Hemidup]

what kind of heads, what kind of cam? 4x4 im assuming

Never assume 4x4 cause he posted here in the 2wd Talk section.;)

[dr.ruff84]

Whoops, i just figured cause he was over 5000 lbs, i don't see to many heavy 2wd trucks.

[coley 1334]

Whoops, i just figured cause he was over 5000 lbs, i don't see to many heavy 2wd trucks.

x2:D

[Rumblebee2655]

Yea it's 2wd reg cab. 5020lbs. DOT certified scale at work! PPP stage 2 heads, inertia 218-218 cam, 3200 stall converter, long tubes, 3" pipe, CAI, Sharadon stage 3 vb, TT with 4.56 gears. Is a 8.9 bad? considering that i outrun several mustangs, built s-10's, and an early 70's Dodge Dart Swinger w/ a 340

[coley 1334]

Yea it's 2wd reg cab. 5020lbs. DOT certified scale at work! PPP stage 2 heads, inertia 218-218 cam, 3200 stall converter, long tubes, 3" pipe, CAI, Sharadon stage 3 vb, TT with 4.56 gears. Is a 8.9 bad? considering that i outrun several mustangs, built s-10's, and an early 70's Dodge Dart Swinger w/ a 340

was it on street tires?

[adamsredlines]

Id think you should be much faster than that....

[Onebadbee]

oh ya much faster

[Rumblebee2655]

yea street tires! small problem with wheel hop on takeoff

[LETHAL HEMI]

yea street tires! Small problem with wheel hop on takeoff

where you located? Do you have a high elevation track

[Rumblebee2655]

Nope Anderson, SC

[coley 1334]

Id think you should be much faster than that....

yea man u need some DRs u should be way way faster with ur mods