Stage 2 SRT 4 injectors

[Carrolls Ram]

Was talkin to Tim from NCTS on the phone friday about ordering the iEMS3 and was asking him what injectors he would use and he was sayin that he'd probably use stage 2 srt-4 injectors. Anybody know the best/cheapest place to get em, or even have a part number? I was lookin through the parts catalogue and see the stage 2 "kit" but i dont want all the crap that comes with it, just the injectors.

[adamsredlines]

Ebay

[Darell]

SRTKLLR (Jaime) from DT. He runs http://elcolasmotorsports.com/catalog/ I've bought a couple of sets from him now and seems to keep a good selection.

[adamsredlines]

SRTKLLR (Jaime) from DT. He runs http://elcolasmotorsports.com/catalog/ I've bought a couple of sets from him now and seems to keep a good selection.

geeeeeez $10k for a 392 shortblock?????

[Hemi345]

Theres some stage 2 SRT injectors on lxforums for 450

[Carrolls Ram]

I just sent that guy a PM. So far he's got the best price ive seen. Seen some stage 1s for like 350 but no stage 2s for under 600 except this guy

[dr.ruff84]

i was going to say i see them on the lxforums quite often. I never check the prices but they are there quite a bit.

[Darell]

Stage 1's will also work and are much more common. This is what I am using.

[Carrolls Ram]

Stage 1's will also work and are much more common. This is what I am using.

And much cheaper. From what ive seen most of the boosted guys run the stage 1s. Hemi345, electricmarquis from DT, and you Darrell run them just from off the top of my head

[adamsredlines]

That's what I got...yoou can get em reeeally cheap too.

[Carrolls Ram]

I thought you had the blue cobras?

And according to chrysler parts direct I can get them for like 110 shipped. Much better than the 632 for the stage 2s. Im weary about that though cause it just says 2.4DOHC neon injectors. But then when I type in the part # for the stage 1s it cant find it.. But dont the 04+ srt4s come with the "stage 1s"

04891574AD is the p/n for stage 1s

[Darell]

And much cheaper. From what ive seen most of the boosted guys run the stage 1s. Hemi345, electricmarquis from DT, and you Darrell run them just from off the top of my head

I just have my fuel pressure cranked up for them to put out what I need.

[Darell]

I thought you had the blue cobras?

And according to chrysler parts direct I can get them for like 110 shipped. Much better than the 632 for the stage 2s. Im weary about that though cause it just says 2.4DOHC neon injectors. But then when I type in the part # for the stage 1s it cant find it.. But dont the 04+ srt4s come with the "stage 1s"

04891574AD is the p/n for stage 1s

Yes. '03 had stage 0, newer models came with stage 1.

[adamsredlines]

I had blue fords for my 4.7...got SRT4s for the 5.7 swap.

[Carrolls Ram]

ah I gotcha.

So just to clarify 1 last time, the srt4s are the 2.4l DOHC correct? And getting the injectors for the 04+ 2.4l will be the stage 1s?

[Darell]

ah I gotcha.

So just to clarify 1 last time, the srt4s are the 2.4l DOHC correct? And getting the injectors for the 04+ 2.4l will be the stage 1s?

If there was an n/a 2.4L DOHC those years (and there should be unless it was SOHC) then not necessarily.

[Hemi345]

If there was an n/a 2.4L DOHC those years (and there should be unless it was SOHC) then not necessarily.

you have a stock motor and gonna boost it and if darrel, electricmarquis and myself who have build and blown motors have them you will be fine :finger2: Make sure your part number matches that number I gave you and you will have stage 1s, they are black and blue, do not get the purple ones floating aronud on ebay that cleam to be 55lbhr and are cheap they are stage 0s I referenced the part number to dodgeparts.com thats what the P/N matched

[Carrolls Ram]

why is it everywhere I type that part number in it says it cant find it? Even if i copy and paste.. Ill figure it out

[adamsredlines]

why is it everywhere I type that part number in it says it cant find it? Even if i copy and paste.. Ill figure it out

Sent you a PM...

[Carrolls Ram]

Sent you a PM...

Thank you sir.

And thanks everyone else for the help

[Darell]

why is it everywhere I type that part number in it says it cant find it? Even if i copy and paste.. Ill figure it out

Generally speaking, Chrysler supersedes their own part numbers every 2.5 weeks and records the changes on a cardboard box in the warehouse.

[daytonahemi392]

there wasn't a n/a 2.4l, the n/a motors were 2.0l. So yeah 2.4l injectors would be from the srt4

[scjeep4.7HO]

I got fuel injectors from a new neon new and they where supposed to be 8 stage 2 injectors. Well when I got them there are 6 part # 04891574AB and 2 part # 04891574AD. I am having trouble finding out info about these fuel injectors. There are obvious differences like the AD part number only has like 4-5 holes and the AB # has 7-8 holes. I know you guys have some knowledge about these injectors. Could someone please give me some info about these?

[Darell]

Both are 53.7 lbs/hr with AB being pre-2008 and AD being newer. Even so I would try and find 8 of the same.

[Darell]

BTW these are stage 1 injectors, not stage 2.

[scjeep4.7HO]

That's what I figured. :(

I'm going to get this resolved from where I got them but if not where is the best place to get 2 of thAB's?

[NissanSwapped06]

there wasn't a n/a 2.4l, the n/a motors were 2.0l. So yeah 2.4l injectors would be from the srt4

My moms Jeep Patriot has a NA 2.4 in it.:Tup: