PDA

View Full Version : Sonnax line booster/SC

kidat46
02-11-2010, 01:28 AM
Anyone using them both? Pros or cons. Thanks!
gergregg
02-11-2010, 03:05 AM
Same as the resistor mod, except with plugs for the harness. Correct?
Hemi345
02-11-2010, 03:10 AM
same as the resistor mod, except with plugs for the harness. Correct?

yes
06RamHemi
02-11-2010, 04:59 PM
Yes Tim good combo. corrected allot of sloppy up/down-shifts and WOT is nice and fast. My 06 always acted funky with the cheap resistors. would hold gears too long under normal acceleration and wouldnt downshift properly. i am running a transgo kit/sonnax/SC. Best combo yet and i've tried everything..
dr.ruff84
02-11-2010, 05:01 PM
any difference between the sonnax one and the one that circle d sells?
06RamHemi
02-11-2010, 05:06 PM
they sell the sonnax. get one its the best 40 bucks youl ever spend IMO
Onebadbee
02-12-2010, 03:21 AM
any one got a link to this i need to bookmark it
dr.ruff84
02-12-2010, 03:10 PM
just pm circle d u can buy 1 straight from them.
Blk05Hemi
02-12-2010, 06:15 PM
Anybody using it with Diablo?
austin4.7
02-12-2010, 07:49 PM
ok i have an 02 so i did the torque management delete mod so would adding this give me to much line pressure?
EBH
02-13-2010, 01:17 AM
Anybody using it with Diablo?

Me, and it works great. I had weird shifts and codes with the resistor like Ricky and this fixed those issues.
fastgraphite04
02-13-2010, 01:42 AM
anyone tried it with a sharadon valve-body, SC,SCT, Trans-go???? not that I haven't guinea pigged alot of other stuff, but..............
Blk05Hemi
02-13-2010, 05:01 AM
Me, and it works great. I had weird shifts and codes with the resistor like Ricky and this fixed those issues.

Cool.Look's like this is going to be my next mod.
Onebadbee
02-13-2010, 05:24 AM
one a few next mods for me
jmgak47
02-13-2010, 05:54 AM
Looks like I will be gettin one of these also after my cam install.
jmgak47
02-13-2010, 05:55 AM
anyone tried it with a sharadon valve-body, SC,SCT, Trans-go???? not that I haven't guinea pigged alot of other stuff, but..............

But I also would like to know know this also. The stage III is also on my soon to get list.
white lightning
02-14-2010, 12:47 AM
sounds like a good mod.

TransGo resistor makes codes on my truck. doesn't set a CEL, SC can't see the codes, but DSP shows a "line pressure low" code.

I am guessing this is because the resistor tells the TCM line pressure is lower than it actually is.
gergregg
02-14-2010, 01:37 AM
anyone tried it with a sharadon valve-body, SC,SCT, Trans-go???? not that I haven't guinea pigged alot of other stuff, but..............

Yes, same as the resistor for me (no problems), but much cleaner install.
fastgraphite04
02-14-2010, 02:14 AM
Yes, same as the resistor for me (no problems), but much cleaner install.

I never installed the resistor with the trans-go kit. I may give this a try, I'm assuming it couldn't hurt.
dirtydodgeon22s
02-18-2010, 12:55 PM
how would this affect 02's with TM delete?
adamsredlines
02-18-2010, 01:02 PM
This boosts line pressure...would be good on your truck
02_4pnt7
02-18-2010, 01:07 PM
I'm thinking of trying one of these out.
dirtydodgeon22s
02-18-2010, 04:42 PM
This boosts line pressure...would be good on your truck

who? me?
adamsredlines
02-18-2010, 05:38 PM
Yeah
kidat46
02-22-2010, 03:50 PM
Finally after a month got all the snow removed and have clear roads. Have the line booster with the superchips/sct combo and it feels really good shifting now. At first when i put the line booster on it would hesitate when shifting but after about 20 miles of shifting its fast and tight now. Gonna send my stage 3 vb back to sharadon to check out and hopefully after i get it back and installed my tranny problems will be over.
06RamHemi
02-22-2010, 05:42 PM
Finally after a month got all the snow removed and have clear roads. Have the line booster with the superchips/sct combo and it feels really good shifting now. At first when i put the line booster on it would hesitate when shifting but after about 20 miles of shifting its fast and tight now. Gonna send my stage 3 vb back to sharadon to check out and hopefully after i get it back and installed my tranny problems will be over.

Tim you have 06 same as me and Randy. No offense to Sharadon but our trucks didnt like their vb. Since i removed mine i have had 0 problems and shifting is perfect. If you like how its shifting now i wouldnt change anything. let the booster/SC do their job they work good together..
kidat46
02-22-2010, 07:03 PM
That's food for thought Rickey. Mine is shifting very well right now. Maybe I can sale it after Sharadon checks it out.