Fucked up my rims

[Onebadbee]

put the primer on (sanding primer) sanded it down blew it off with a air gun to get the excess dust off of it spray the first coat on 4 wheels with 1 can

started the second coat with the remaining first can got a wheel and half done and had to do the next can opened it up started spraying was going great finishing up the last wheel i look up and on the 2nd wheel where i had started with the new can the paint was seperating like oil on water

WHAT THE FUCK

same company same type of paint same comany made the primer paint and sealer im using

temp is 58 inside the building im in

let the rims warm up over night with the heater on in there

what gets me is the only places i sprayed with the 2 can are the one that look fucked up

now can i sand this out or do i have to have it soda blasted

[Darell]

put the primer on (sanding primer) sanded it down blew it off with a air gun to get the excess dust off of it spray the first coat on 4 wheels with 1 can

started the second coat with the remaining first can got a wheel and half done and had to do the next can opened it up started spraying was going great finishing up the last wheel i look up and on the 2nd wheel where i had started with the new can the paint was seperating like oil on water

WHAT THE FUCK

same company same type of paint same comany made the primer paint and sealer im using

temp is 58 inside the building im in

let the rims warm up over night with the heater on in there

what gets me is the only places i sprayed with the 2 can are the one that look fucked up

now can i sand this out or do i have to have it soda blasted

Try spraying it with oven cleaner and it should lift the paint off after a few minutes. It won't damage plastic or metals and the paint can be wiped off with a rag.

[Onebadbee]

how much time do i have to do this???

the paint is just over an hour from the first coat and and 45 from the second

[(fast_hemi)]

could be that it was to humid & cold or it can be your primer was not fully dried and the paint lifted..i would use dupicolor..

[Darell]

how much time do i have to do this???

the paint is just over an hour from the first coat and and 45 from the second


With over cleaner, whenever. Weeks, months.....

[Onebadbee]

sweet