my nitro console came in 2day

[JohnnyHemi]

You get the idea, got a few things here and there to do, but im pretty satisfied with the idea

[LETHAL HEMI]

cant wait to see it installed

[mrjordan2u]

Looks slick

[06 ca bighorn]

Nice!

[johnnyk416]

Looking forward to seeing this installed also, sometimes I wish my 4x4 selecter wasn't on the floor.......

[sldhemi]

didnt someone else do this already? i cant remember his name, but it looked pretty damn clean in his truck... should be pretty badass

[RB24]

it was a guy in cleveland. truck had the AAR stripe and hood scoop

[JohnnyHemi]

yeah he used the hemi nitro shifter though, i had to do more cutting to it then i had originally planned

[jordan21210]

it was a guy in cleveland. truck had the AAR stripe and hood scoop

the center console in that truck is the best part...the rest of that thing is nasty.

[RB24]

agreed

[Hemi345]

Cool cant wait to see the finished product.

[JohnnyHemi]

its in but im making sure the shifter is gonna be okay before i bolt it down and fill the gaps.

[Hemi345]

what shifter is that you are using?

[JohnnyHemi]

b&m mega shifter, i drilled a hole in the selector shaft anchor for the solid piece and cotter pin that comes with the kit, but i dont really like that it doesnt go through enough for my mindset so i bought the quick release end for the cable through jegs from B&M. Its exactly like the stock pivot for the stock cable only this one is a little bigger and you can screw the quick release end on the b&m cable and there is no in and out play at all.

http://www.jegs.com/i/B-M/130/80323/10002/-1?parentProductId=747150
here is what im talking about. Much more secure than the solid end and cotter pin.

[Onebadbee]

b&m mega shifter, i drilled a hole in the selector shaft anchor for the solid piece and cotter pin that comes with the kit, but i dont really like that it doesnt go through enough for my mindset so i bought the quick release end for the cable through jegs from B&M. Its exactly like the stock pivot for the stock cable only this one is a little bigger and you can screw the quick release end on the b&m cable and there is no in and out play at all.

http://www.jegs.com/i/B-M/130/80323/10002/-1?parentProductId=747150
here is what im talking about. Much more secure than the solid end and cotter pin.

wish i would of done that

you got a part number??

[JohnnyHemi]

thats the link, the B&M cables all have that same sized thread. Plus ill be able to still keep my stock one incase the cable ever breaks.