Ordering a new Mod

[ramcrazy]

392 :cowb:


To be continued:)

[dline]

top guided?

[ramcrazy]

lol......... Hugo guided:D

[LETHAL HEMI]

top guided?

:cheers::D

[dline]

Hurricane hugo hemi engine.

[kidat46]

Good Luck! Are you telling yet 5.7 or 6.1?

[Carrolls Ram]

W00t! Congrats. That'll be fun when you get it in :)

[Mr.Hemi]

You lucky Bastard.
We need pictures at some point.

[Onebadbee]

well no more crane 216 someone will get a nice cam

[Hemidup]

Good Luck! Are you telling yet 5.7 or 6.1?

I'll spill the beans. It'll be a 6.1 based 392.

[kidat46]

I'll spill the beans. It'll be a 6.1 based 392.

:dance: Awesome!

[Hemidup]

top guided?

Yup. I'll guide the pistons down the center of the cylinder's myself.

[Hemidup]

Denny or I will send pic's of Mike's build to Mike. It'll be up to him to post them.

[dayton hemi]

Denny or I will send pic's of Mike's build to Mike. It'll be up to him to post them.

tell denny no more pics from the blueberry;)

[ramcrazy]

6.1 based 392,5.7 BIG VALVE heads,cam to be decided in near future.
Eagle rods,ross pistons ect....... Should be a fun truck to drive after install.
Better driveshaft will happen as well....... Not shooting to be the quickest
or the most radical,just plenty of power and reliable..... When the pics come in I will post them....... Had a budget and this will keep me right there.

[ramcrazy]

well no more crane 216 someone will get a nice cam

I will end up with my 5.7 shortblock with a cam in it, crank and pistons....lol..... The 216 I will sell if someone wants it....I love the 216 but
bigger motor needs bigger cam.......

[DaKing]

Ha, Ha, you said..... "Budget" :)

I had one of those too, when I started my 392 conversion. months later, and twice my original budget it was complete.

your project sounds awesome. post pictures.

[SharaDon]

Ha, Ha, you said..... "Budget" :)

I had one of those too, when I started my 392 conversion. months later, and twice my original budget it was complete.

your project sounds awesome. post pictures.

only twice?? you had a "few" issues.

Mike is coming here to install and crank it up.. No worries.

[ramcrazy]

only twice?? you had a "few" issues.

Mike is coming here to install and crank it up.. No worries.

Don't forget the Sharadon driveway burnout......It's a must:)

The budget isnt small but I have been working towards this for 2 years so Im ready to get it built.

[ramcrazy]

What????? No pic of the naked block yet?????????

































:D

[dayton hemi]

he probably has pictures on his blueberry:D

[ramcrazy]

dudnt matter......:D

[Hemidup]

dudnt matter......:D

Don't worry bout it...Dudnt matter. lol

[SharaDon]

What????? No pic of the naked block yet?????????

































:D

I should have your block Friday.

[ramcrazy]

Sweet!!!!!!

[SharaDon]

I confirmed it today. I will have the block tomorrow

[ramcrazy]

Good deal Denny.......Looks like flurries this weekend here,I guess winter is coming fast.Spring can't come fast enough.lol.....

[ramcrazy]

By the way Jerry.... I just opened a letter and it was from S.S. Promotions,
32.00 dollar check....... My first winnings racing,what should I spend it on?????? Cookies???? hmmmmmmm chocolate chip or Oatmeal rasin....

[dayton hemi]

By the way Jerry.... I just opened a letter and it was from S.S. Promotions,
32.00 dollar check....... My first winnings racing,what should I spend it on?????? Cookies???? hmmmmmmm chocolate chip or Oatmeal rasin....

anything with pecans

[Hemidup]

By the way Jerry.... I just opened a letter and it was from S.S. Promotions,
32.00 dollar check....... My first winnings racing,what should I spend it on?????? Cookies???? hmmmmmmm chocolate chip or Oatmeal rasin....

Congrat's on your winnings. Spending it on cookies would be a waste. Put that towards a dinner with your family and then have your wife make us some cookies. Its a win, win situation. :)

[SharaDon]

he probably has pictures on his blueberry:D

Hey,,, easy on the berry

[ramcrazy]

Texas guys know nothing about the power of the Berry.

[SharaDon]

Texas guys know nothing about the power of the Berry.

Did you get the phone pic I sent? Camera is at home,,,since St Louis.

I was thinking about your timing of this build..

2 days after we got home from St Louis, my parts guy called and said he just recieved 2 6.1 blocks.

He couldn't find the order for them, but thought I might want them.... (I ordered them back in January) Then the order got canceled,,, then the dealership was "gone". (2 stores, 1 was shit canned by chrysler)

The good thing,, my same parts guy is at the home store and everything is normal,,,, and 2 6.1 blocks "just" showed up. LOL Awsome.
Since my personnel block was used for a customers build over the winter. I'm glad to have it back. Mike,, your timing was perfect.

[ramcrazy]

Now if we can find a cam core.....lol.......... I will check for the pics now... Did ya send it by email??? If so I have not recieved it yet.... Will keep looking for it.........

[SharaDon]

No, I sent it to your cell #. I'll get a new one in the morning

[dayton hemi]

No, I sent it to your cell #. I'll get a new one in the morning

oh is that what that picture you sent texted me was, i thought it was mine:)

[dayton hemi]

hey mike pm your # and i will give ya a copy

[SharaDon]

oh is that what that picture you sent texted me was, i thought it was mine:)

Lmao,,, nice

[ramcrazy]

lmao.... Send them to me by email Denny....Im phone pic impaired

[ramcrazy]

Sweet...... Ok first pic of new build.

[dayton hemi]

still :drool: over that cuda in the background, nice bag mike

[ramcrazy]

still :drool: over that cuda in the background, nice bag mike


Lmao.....Big bag is right..:devil:

[SharaDon]

Now if we can find a cam core.....lol.......... I will check for the pics now... Did ya send it by email??? If so I have not recieved it yet.... Will keep looking for it.........

Yes,,, cam cores. CamMotion still doesn't have any. I even called Comp today. After 1/2hr on hold, I gave up.

[ramcrazy]

We will find one...Wait....We can use Larrys!:D

[Hemidup]

still :drool: over that cuda in the background, nice bag mike

You seen one Cuda, you've seen them all. lol

[dayton hemi]

We will find one...Wait....We can use Larrys!:D

Yes,,, cam cores. CamMotion still doesn't have any. I even called Comp today. After 1/2hr on hold, I gave up.

matt offered his:finger2:

[SharaDon]

matt offered his:finger2:

Nope,,, It's not right for this aplication..

I would like to use Matt's cam in something.. Just not a QC

[Darell]

Yes,,, cam cores. CamMotion still doesn't have any. I even called Comp today. After 1/2hr on hold, I gave up.

Don't give up. I finally got my new oil pump and my charge pipes to stay together at 14 psi and the cam should makes things more fun. By the way my intercooler is knocking my IAT down by 150*F on long pulls and meth kicks it 10* below ambient. Finally running right just in time for snow.

[Hemidup]

Don't give up. I finally got my new oil pump and my charge pipes to stay together at 14 psi and the cam should makes things more fun. By the way my intercooler is knocking my IAT down by 150*F on long pulls and meth kicks it 10* below ambient. Finally running right just in time for snow.

So an a/a intercooler would work well for my setup? Better than using w/m?

[Darell]

So an a/a intercooler would work well for my setup? Better than using w/m?

If I was you I would throw an ice-box on the passenger fender:

http://www.pwr-performance.com/images/icebox.jpg

This is the same core I am using.

[Hemidup]

If I was you I would throw an ice-box on the passenger fender:

http://www.pwr-performance.com/images/icebox.jpg

This is the same core I am using.

Okay refridgerator man, (lol) Your hired. I'll call you this weekend for more details.

[SharaDon]

Don't give up. I finally got my new oil pump and my charge pipes to stay together at 14 psi and the cam should makes things more fun. By the way my intercooler is knocking my IAT down by 150*F on long pulls and meth kicks it 10* below ambient. Finally running right just in time for snow.

I'm sure your ready. You will have the worlds longest wait for a camshaft.

150* HOLY HP,,,,, nice.

[SharaDon]

Okay refridgerator man, (lol) Your hired. I'll call you this weekend for more details.

Ya,,, just what you need. More HP. When is the cage going in????

[Darell]

Ya,,, just what you need. More HP. When is the cage going in????

Never. Low boost at 5# it runs like a raped ape and is dead quiet. :devil: It's too bad the stock IAT sensor takes like 5 minutes to react. I'm sure the truck would be more responsive if the sensor was as quick as my Fluke meter is. I might have to try and graph it's resistance for normal temperatures and replace it with something better. It does, however, react instantly to being sprayed with methanol.:D

[ramcrazy]

Surfing around and found this video.Thats when I knew I would someday have a stroker myself.......

http://videos.streetfire.net/video/SharaDon-Performance_146500.htm

[SharaDon]

Surfing around and found this video.Thats when I knew I would someday have a stroker myself.......

http://videos.streetfire.net/video/SharaDon-Performance_146500.htm

LOL,,,, so many things on that build would have been better with tuning.

[ramcrazy]

LOL,,,, so many things on that build would have been better with tuning.

True. But I had a great time following that build with Matt...

[HoustonHemi]

Never. Low boost at 5# it runs like a raped ape and is dead quiet. :devil: It's too bad the stock IAT sensor takes like 5 minutes to react. I'm sure the truck would be more responsive if the sensor was as quick as my Fluke meter is. I might have to try and graph it's resistance for normal temperatures and replace it with something better. It does, however, react instantly to being sprayed with methanol.:D

Mine changes with a second or less when monitoring with diablo. It will be 10 to 15 higher if I remember correctly than would go down to ambient temp when I floor it.

[Darell]

Mine changes with a second or less when monitoring with diablo. It will be 10 to 15 higher if I remember correctly than would go down to ambient temp when I floor it.

What year is your truck? I wonder if the sensor is the same p/n.

[HoustonHemi]

07

[ramcrazy]

Ok Ladies back to the topic at hand.....lol.......

Just a few new pics to share...... We have a long way to go but it's
great seeing it all become reality. Thanks for the pics Denny......

[kra-z-cat]

why is the crank so dark is that right or what ?

[dayton hemi]

why is the crank so dark is that right or what ?

been working on that post all night, eh, dudnt matter:finger2:

[kra-z-cat]

yes and you

[ramcrazy]

I know Kra-z-cat Knows why the crank is so dark...Any of you other guys want to take a guess??? Denny and Jerry you can't guess,you know.....

[ramcrazy]

Larry you kill me. LMAO.....

[dayton hemi]

Larry you kill me. LMAO.....

i try

[ramcrazy]

Looks like santa showed up at Sharadon today,concrete anyone???

[kra-z-cat]

now thats funny

[dayton hemi]

Looks like santa showed up at Sharadon today,concrete anyone???

jim is that you

[dline]

cryogenic

[dayton hemi]

cryogenic

already got it:crazy:

[dline]

isn't doing that to the crankshaft common sense?

[dayton hemi]

isn't doing that to the crankshaft common sense?

kinda like using new parts

[kra-z-cat]

jim is that you

no dudnt matter

[ramcrazy]

cryogenic... Expand on that......

[dline]

metals frozen to low temperatures showed more resistance to wear.

[ramcrazy]

Good guess but not frozen.....

[dline]

wow nobody else knows?

i guess i'll give the real answer......maybe

[ramcrazy]

6.1

[Hemidup]

what crank?

My spare one that I haven't needed yet after 400 passes with my cheap ass foreign built rods....Glad I could put it to use.

[dline]

the mexicans build the best stuff.

[JohnnyHemi]

why is it a used nascar crank i assume.... AHA!!

[ramcrazy]

why is it a used nascar crank i assume.... AHA!!

LMAO!!!!! No.

[Mr.Hemi]

Look forward to seeing it all come together.
Wet dreams for sure.
Still looks like a cell phone camera though.
Maybe we could all pitch in and get Sharadon a digital camera.LOL.

[SharaDon]

Look forward to seeing it all come together.
Wet dreams for sure.
Still looks like a cell phone camera though.
Maybe we could all pitch in and get Sharadon a digital camera.LOL.

You guy's are brutal.. LOL

My camera is a few yrs old,, but damn.

[dr.ruff84]

A few years old????

I have seen polaroid pictures with better quality. lol

[ramcrazy]

I thought someone would have the answer by now!!!!!!

Nitriding is a highly specialized surface hardening treatment that produces a thin but high hardness case on a wide variety of steels. The significant advantage of nitriding over other surface hardening processes is that the case hardness is developed without quenching and the attendant distortion problems. Finishing operations can be eliminated or held to a minimum.
Nitrided surfaces are highly wear resistant and provide anti-galling properties. Fatigue life is improved, and the process improves the corrosion resistance of the part. An additional advantage of nitriding is that the surface hardness is resistant to softening by temperatures up to the process temperature.

The nitriding process involves the diffusion of nitrogen into the base steel. This diffusion takes place at relatively low temperatures (typical process temperature is 975 F) and the hardening occurs without quenching. Core properties are not affected by the nitriding process provided the final tempering temperature for the product was higher than the nitriding process temperature.

[ramcrazy]

You guy's are brutal.. LOL

My camera is a few yrs old,, but damn.

lmao.... I dont care if they are old poloroid 1 step pictures...I like them...lol.

[Hemidup]

I thought someone would have the answer by now!!!!!!

Nitriding is a highly specialized surface hardening treatment that produces a thin but high hardness case on a wide variety of steels. The significant advantage of nitriding over other surface hardening processes is that the case hardness is developed without quenching and the attendant distortion problems. Finishing operations can be eliminated or held to a minimum.
Nitrided surfaces are highly wear resistant and provide anti-galling properties. Fatigue life is improved, and the process improves the corrosion resistance of the part. An additional advantage of nitriding is that the surface hardness is resistant to softening by temperatures up to the process temperature.

The nitriding process involves the diffusion of nitrogen into the base steel. This diffusion takes place at relatively low temperatures (typical process temperature is 975 F) and the hardening occurs without quenching. Core properties are not affected by the nitriding process provided the final tempering temperature for the product was higher than the nitriding process temperature.

Wow, you sound like someone else I know.

[Darell]

I thought someone would have the answer by now!!!!!!

Nitriding is a highly specialized surface hardening treatment that produces a thin but high hardness case on a wide variety of steels. The significant advantage of nitriding over other surface hardening processes is that the case hardness is developed without quenching and the attendant distortion problems. Finishing operations can be eliminated or held to a minimum.
Nitrided surfaces are highly wear resistant and provide anti-galling properties. Fatigue life is improved, and the process improves the corrosion resistance of the part. An additional advantage of nitriding is that the surface hardness is resistant to softening by temperatures up to the process temperature.

The nitriding process involves the diffusion of nitrogen into the base steel. This diffusion takes place at relatively low temperatures (typical process temperature is 975 F) and the hardening occurs without quenching. Core properties are not affected by the nitriding process provided the final tempering temperature for the product was higher than the nitriding process temperature.

Never seen nitride on steel before, only aluminum.

[ramcrazy]

Wow, you sound like someone else I know.

lol... I had heard of it but did not know what it was.So being me I looked it up. I will tell ya this ,Its like a crack addiction,I come home every night and run to the pc to see if I have any new pics...lol.....

[SharaDon]

Never seen nitride on steel before, only aluminum.

I guess you didn't get a look at your crank then

[ramcrazy]

Off topic... I work for a Dodge Dealership in the parts dept,I was offered a counter position today so now Im moving up to selling the parts.Training will take some time but in this economy any advancement is great. Mopar all the way!!!!

[Hemidup]

lol... I had heard of it but did not know what it was.So being me I looked it up. I will tell ya this ,Its like a crack addiction,I come home every night and run to the pc to see if I have any new pics...lol.....

We Nitride every one of our offset ground crankshafts. Something others haven't done cause it raises the price of the crankshaft and engine build by $200.

I'll have to say, right now your have some boring pic's of your build. To me that is. A bare block and some packages of parts. What till the bling bling pictures come out. Oh yeah baby!

[ramcrazy]

Bling is good!!!! But build threads are my favorite to follow along so its sweet
having the boring pics too......Hows the back?

[Hemidup]

Its getting better lol, but I'll have to lift your block a few more times. Your block will be going to the machine shop to check and make sure its square before the assembly starts.

[kra-z-cat]

we need input input now!!!!!!!!

[dayton hemi]

we need input input now!!!!!!!!

wow five days and you still repeated yourself:D:nopics:

[kra-z-cat]

dudnt matter

[ramcrazy]

6 posts now!!!! Keep it up Jim and you to will be a post whore like Larry....:D

[dayton hemi]

dudnt matter

mike put me up to it:box:

[ramcrazy]

One more item down....3200 edge converter ordered today!

[ramcrazy]

Larry put me up to it..:box:

[ramcrazy]

Al right... Sharadon Rocker collars will be in shop on Thursday and Edge 3200
Verter is shipped and will be here Friday!!!! Getting closer!

Driveshaft is in shop as well.

[kra-z-cat]

we need pics

[ramcrazy]

we need pics


And you need a cam.....

[kra-z-cat]

i know is it friday at 2:15 yet

[ramcrazy]

WOW!!! 9 posts...You are getting good at this posting stuff......

[dayton hemi]

WOW!!! 9 posts...You are getting good at this posting stuff......

i wasnt gonna say it:D:D:D:D

[ramcrazy]

But you were thinking it..:D :cheers:

[dayton hemi]

But you were thinking it..:D :cheers:

sorry, but yes i was:cheers:

[Hemidup]

I didn't reconize his handle at first, but I remember the truck..... Dudnt Matter! lol

[ramcrazy]

LOL.... That is Jim's truck and that is Jim...... I see that my rocker collars are in your shop? Where are the pics? :dance: Hope you dont charge for photos? My converter is in Kansas and will be at my door tomorrow.....

[SharaDon]

Yes, they arrived today. Didn't open the box. Was busy test driving tunes.

[kra-z-cat]

need pics now!!!!!!!

[ramcrazy]

Yes, they arrived today. Didn't open the box. Was busy test driving tunes.


That sounds fun.......

[dayton hemi]

need pics now!!!!!!!

do you have a quick reply button or what jim

[kra-z-cat]

yes

[ramcrazy]

3200 Edge stall arrived today!!!! Life is good!

[Hemidup]

3200 Edge stall arrived today!!!! Life is good!

Bummer....You should have ordered the Edge 3201 stall converter. lol

[ramcrazy]

Dang!!!!!! OUTDATED AS SOON AS I GET IT....

[Onebadbee]

whats size converter did you go with?

[dayton hemi]

whats size converter did you go with?

i think he got a 2145 stall, not sure though i may have misread his post

[Onebadbee]

i think he got a 2145 stall, not sure though i may have misread his post8 10 or 11

[ramcrazy]

11

[ramcrazy]

Still waiting on pistons but took some pics of a few new goodies.

3200 Edge stall

new miller tool "spring installer" To be used on Jim's truck in a few weeks...

[ramcrazy]

Oh by the way,this pic is for Denny!!!

[SharaDon]

Oh by the way,this pic is for Denny!!!


:finger2:

[kra-z-cat]

is that all the pics we get after all this time and one is for me?

[SharaDon]

is that all the pics we get after all this time and one is for me?

Patience, it's not a microwave dinner

[ramcrazy]

lmao!!!!!!

[dayton hemi]

Patience, it's not a microwave dinner

lmfao, dudnt matter:finger2:

[ramcrazy]

is that all the pics we get after all this time and one is for me?

That is my miller tool.....But you can use it!:devil:

[ramcrazy]

Btw.... Im sure the real bling will show up any day now....

[ramcrazy]

Update.... Still waiting for pistons to show up:D

[kra-z-cat]

you should be good at waiting after all this time lol

[ramcrazy]

lol.... Funny sparky

[ramcrazy]

The cam choice is something Im very proud to be part of.
As many remember Matt and his 370 build,the cam from that original build will be in my 392. Thanks to Matt for offering me the chance to make that
monster cam come to life in another Sharadon Stroker.
This was my decision to install this cam and Im sure Sean will have his hands full tuning this one. Is it spring yet?????

[Hemidup]

Congrats Mike. I'm just as tickled as you are. That cam sure did rock in Matt's truck. I'm sure Sean will have a handle on the tuning. He said if Denny could get it to drive with the SMT6, it shouldn't be much of an issue with SCT.

[ramcrazy]

Thanks Jerry for the support and just being a good friend. That cam
is a monster and Sean will tune it just fine. Im losing the heavy bed cover and going with a light weight one. Also putting on a rollpan and losing the
hitch. Moving battery to the back and a few other mods before spring.
Thing Im most looking forward to is Cedar Falls in the spring,good racing,good food and a few brews. Not to mention the closer we get to summer the closer we are to Walleye fishing.....:Tup:

[ramcrazy]

Where is that brown truck at? It has my cam in it!!!!:Tup:

[fastgraphite04]

:cheers:

[EBH]

Where is that brown truck at? It has my cam in it!!!!:Tup:
It has my exhaust pieces for my 3" true duals, lol.:D

[ramcrazy]

It has my exhaust pieces for my 3" true duals, lol.:D

Sweet!!!!!! :Tup:

[ramcrazy]

:cheers:

lol.....

[ramcrazy]

Dec 22, 2009 9:02 PMArrived at FedEx locationSAINT PAUL

That means Denny will have my cam TODAY!!!!!!!

[ramcrazy]

That Big nasty cam has arrived...... Now where are my pistons?..lol....

[ramcrazy]

:nopics:

[SharaDon]

:nopics:

I could post a pic,,,, but they all look the same in a pic.

How about I post the specs. For you .006 degree guy's,,, it's big.

All #'s are at .050

LSA 110
overlap 13.7*

INTAKE
V open 9* BTDC
V closed 42.3 ABDC
231.4 crank deg duration
Valve lift .581
Intake center line 106 ATDC

Exhaust
V open 53.1 BBDC
V closed 4.7 ATDC
237.8 crank deg duration
Valve lift .588
Exhaust center line 114 BTDC

:cowb:

Bringing back memory's.... Oh boy? LOL

[ramcrazy]

That is what Im talking about!!!!!:D

[kra-z-cat]

I could post a pic,,,, but they all look the same in a pic.

How about I post the specs. For you .006 degree guy's,,, it's big.

All #'s are at .050

LSA 110
overlap 13.7*

INTAKE
V open 9* BTDC
V closed 42.3 ABDC
231.4 crank deg duration
Valve lift .581
Intake center line 106 ATDC

Exhaust
V open 53.1 BBDC
V closed 4.7 ATDC
237.8 crank deg duration
Valve lift .588
Exhaust center line 114 BTDC

:cowb:

Bringing back memory's.... Oh boy? LOL

if thats the best you can do I it will have to do!

[ramcrazy]

if thats the best you can do I it will have to do!

lol......:finger:

[ramcrazy]

Damn guys....... way to say :gives:








































lol.....

[Hemidup]

As soon as this engine gets off the stand, Mikes will be going on.

[Spedly]

Thats pretty.

[EBH]

Looks real nice. I would have a hard time waiting on something like this.

[ramcrazy]

Thats why I ordered it over the winter.We have snow in our yard as deep as my knees... It will be all done and installed by track time this spring....
I got the best in the business building this,"AND THAT AINT NO BULLSHIT"

LOL....... Best tuner out there is going to tune it as well......

[EBH]

Yea, I guess that's true. I forget that Iowa gets lots of snow, so your not really missing out on anything anyways. I'd be happy right now with some big valve heads from sharadon, but I've got a baby coming, so I'm not going to spend 2 grand right now. Maybe next Christmas. What heads are you going with?

[ramcrazy]

Sharadon sp 2 heads. Congrats on the baby,man you aint gona sleep for a year......lol...

[ramcrazy]

:cowb: Pistons,pistons,who's got my pistons.....:cuss:

[ramcrazy]

new pml deep trans pan is on it's way.. Just another piece to the puzzle....

[adamsredlines]

Still no pistons?

[ramcrazy]

nope....Diamond has had a problem with something and it's holding us up.
Every thing else is ready to go.The down side is it gives me more time to think. That has turned into more parts ...lol.... Why would a guy buy a new
deep trans pan????

[kra-z-cat]

why we all need to know!

[ramcrazy]

why what Jim?
:fu:

[dirtydodgeon22s]

does that mean youre looking to get rid of a deep trans pan? id be interested 100%

[Hemidup]

does that mean youre looking to get rid of a deep trans pan? id be interested 100%

No, it means that Mike is getting a new trans pan for his new transmission build.

[ramcrazy]

How did you know?....lol.....

Ordered it and will bring it up with the truck. I think with the extra 3 quarts
I wont need the cooler...

[HemiRamOn22s]

probably not. do you already have a 16 row tranny cooler. if you have the 11 i would just upgrade to the 16 and forget the deeper pan but if you already have the larger cooler then the deep pan might be overkill and never let the tranny get up to the proper temp.

[Darell]

probably not. do you already have a 16 row tranny cooler. if you have the 11 i would just upgrade to the 16 and forget the deeper pan but if you already have the larger cooler then the deep pan might be overkill and never let the tranny get up to the proper temp.

IMO, a deeper pan is useless without a deeper filter or filter extension. Come on Jerry it shouldn't take too much to fab up extensions for us. I know Chev guys have them.

[ramcrazy]

Mounted the new megashifter today...Cut the base to fit the floor perfect.
Thats all we got done today but the inside fit is great.
Will work on the cable hook up tomorrow....

[ramcrazy]

done...

Next week put on the shifter delete,put in new srt 10 radio bezel/with start button.
I have hated that woodgrain from day one.....

[ramcrazy]

Pistons............ :D

[dayton hemi]

wow invisible pistons, wish i woulda got those

[Onebadbee]

the megashifter is fun to bad we cant use them right now

[ramcrazy]

wow invisible pistons, wish i woulda got those

You got the invisable fuel pump set up, remember.... I just have a feeling they are very close to being in the shop....Plus I was board and had to
post something.

[ramcrazy]

the megashifter is fun to bad we cant use them right now

No shit!!!! I havent had it out of the garage since December.

[1badhemi07]

:dance::dance::dance:

[ramcrazy]

:pop:

[dayton hemi]

:pop:

:stfu::p

[ramcrazy]

:finger2:

[Hemidup]

Give me a bit. I just got home from dinner with the kids. I may have a couple pic's I could post for ya.

[FlyinRyan]

ya'll still have snow on the ground up there?

[Hemidup]

Last Friday we dropped off 2 blocks at the machine shop and picked one up. I wonder who's it is?

[ramcrazy]

Still about 16 inches on the ground here.Our total since Dec is 57 inches.
Been a long cold snowy azz winter...

[ramcrazy]

Last Friday we dropped off 2 blocks at the machine shop and picked one up. I wonder who's it is?

Sweet... my block has a tattoo...

[Hemidup]

Sweet... my block has a tattoo...

Today it got a massage and then a bath.

[ramcrazy]

What a nice color....Think I will keep it.......Thanks Jerry, it is great to see
some pics......

[Hemidup]

Denny checking out a few more of your goodies. I also have some pictures of some round things....

[Hemi345]

Nice color.

[ramcrazy]

Denny checking out a few more of your goodies. I also have some pictures of some round things....



Looks like we may just make Cedar Falls this spring. If the snow melts slow and no flooding takes place.. Jim is doing the upper and lower ball joints this weekend. New a arms and tie rods and ends. Truck will get alligned the next weekend and it will be ready to go to Hugo.....

What are the round things you speak of....:Tup:

[Hemidup]

Looks like we may just make Cedar Falls this spring. If the snow melts slow and no flooding takes place.. Jim is doing the upper and lower ball joints this weekend. New a arms and tie rods and ends. Truck will get alligned the next weekend and it will be ready to go to Hugo.....

What are the round things you speak of....:Tup:

You have many new round things now at the shop.

[kra-z-cat]

not pistons?

[ramcrazy]

Yes pistons.:peelout:

[ramcrazy]

Looks like the weekend of the 20th, pending any hold ups the 392
will be installed.....:cheers:

[Hemidup]

Looks like the weekend of the 20th, pending any hold ups the 392
will be installed.....:cheers:

You guys planning on coming up Friday night?

[ramcrazy]

HELL YA!!!! Get the bud light cold.....

[dayton hemi]

HELL YA!!!! Get the bud light cold.....

keystone light:cheers:

[ramcrazy]

yup that too!!! Talking to Jerry now.......

[kra-z-cat]

no keystone light in MN. on the 20th!!!!!!

[dayton hemi]

no keystone light in MN. on the 20th!!!!!!

you oughta try it

[kra-z-cat]

bud light has a higher shine

[ramcrazy]

you oughta try it

It should make good wax

[dayton hemi]

It should make good wax

just dont let jim mark any tires, and we will be okay

[ramcrazy]

lol.... Maybe just a pic of him standing in the back of Jerrys truck?

[SharaDon]

lol.... Maybe just a pic of him standing in the back of Jerrys truck?

Make sure his socks are clean. LOL

[jmgak47]

keystone light:cheers:

:piss2:Bud Light??? Keystone Light????? :puke:

Budweiser! :Tup:

And if you really want a good light beer Sam Adams Light!

[JohnnyHemi]

Mgd

[ramcrazy]

4 days and counting:cheers:

[DaBeeOnN859]

SS :D

i so late but congrats :D

[Hemidup]

Just entered my mind Mike. Can you pick up some new fuel injector O rings from the dealership? Denny should get the header studs by today which should be the last thing we need on our side of the list.

[ramcrazy]

Hope we have them in stock.... Will check tomorrow,thats cutting it close!

[Hemidup]

Tomorrow we'll bolt your heads on, then we need your truck.

[ramcrazy]

That is some porn right there!!!!!

[ramcrazy]

:cowb:

[Hemidup]

This is the cowbell your engine was built around.

[kra-z-cat]

nice cant wait

[Hemidup]

Checking out piston to valve clearance.

[Hemidup]

Bagged and tagged.

[ramcrazy]

hell yeah!!!! Just got home and truck is loaded and we are ready to go.
The o rings are in hand but 8.32 for 2. Thats frickin expensive!

[Hemidup]

The o rings are in hand but 8.32 for 2. Thats frickin expensive!

No shit? WTF? I think we'll have you take them back and buy some from NAPA. Hopefully they have them cause normally they don't. Thats the main reason I asked you to get them.

[ramcrazy]

I got 8...... If they have 8 more grab them!

[Mr.Hemi]

Tomorrow we'll bolt your heads on, then we need your truck.

Looks friggin awesome.
Congrats you lucky Bastard.LOL.

[ramcrazy]

The beast is up and running. I will get the pics and video tomorrow from my brother. I have alot of tuning to do with Sean but it is running. I will tell ya this,at 1150 rpm idle the cam lumps like hell.This cam is a monster in every way. The motor was all ready to go and painted up perfect,The guys at Sharadon are a class act and the weekend was well worth the trip up there.
Thanks Larry for flying up from Texas to hang out with us. :devil:

[dayton hemi]

always fun to go up there and hang out. cant wait to hear that cam with a lower idle, it was nasty

[daytonahemi392]

good to here man...enjoy it!

[ramcrazy]

always fun to go up there and hang out. cant wait to hear that cam with a lower idle, it was nasty

I was frickin a mess this morning! I will call ya later this week.

[ramcrazy]

http://www.streetfire.net/video/392-idle_742255.htm

More to come.....

[adamsredlines]

Aw man...can't watch streetfire videos. :(

[ramcrazy]

Aw man...can't watch streetfire videos. :(

at work or at home?

[dayton hemi]

sounds great, cant wait to hear it lump in stl.

[ramcrazy]

Me too... You may not hear it over that blower wine your going to have....:devil: Remember I get 1/2 track head start.....

[dayton hemi]

Me too... You may not hear it over that blower wine your going to have....:devil: Remember I get 1/2 track head start.....

so i need to count to 10 mississippi right:devil:

[ramcrazy]

Or feed me that shrimp stuff the night before:devil::devil:

[dayton hemi]

lmao, it hurt you and sandy, so what does that tell ya

[adamsredlines]

I'm om a phone that doesn't support streetfire videos...only youtube.

[dayton hemi]

hey mike, why dont you give jerry some burnout lessons

[ramcrazy]

http://www.youtube.com/user/ramcrazy1?feature=mhw

[sldhemi]

you know soap and water does wonders...

jk man glad to see your up and running

[adamsredlines]

Nice burnout!

[Onebadbee]

nice lookin truck and hopefully it performs just as well

hemid up ill drive up there and install new garage doors for ya

for a set of heads

[ramcrazy]

you know soap and water does wonders...

jk man glad to see your up and running

lmao....When we pulled in at 10 pm there was and inch or two
of road grime and ice all over the truck....I had it clean as a pin when we loaded it the night before......

[ramcrazy]

nice lookin truck and hopefully it performs just as well

hemid up ill drive up there and install new garage doors for ya

for a set of heads

OMG!!!! You don't know how funny that statement really was....

ROFLMAO!!!!!!

Btw The heads ON MY TRUCK are insane....

[ramcrazy]

Nice burnout!

I just had to touch the gas and she was rolling the smoke. She is still
not tuned so I just took it easy and got my Sharadon drive burnout...

[Hemidup]

nice lookin truck and hopefully it performs just as well

hemid up ill drive up there and install new garage doors for ya

for a set of heads

We have the new garages doors to install, damn tornado, just haven't had the time to install them. Maybe daytonhemi will fly up here and give you a hand.:D

[Hemidup]

...Btw The heads ON MY TRUCK are insane....

Yes. Yes they are.:peelout:

[Hemi345]

Awsome glad your up and running, makes me sad though I want mine to run :(

[VA4MEDS]

Mike,

All I can say is NASTY, NASTY, NASTY!!!!

I'll call you tonight. Gears are out today.

[ramcrazy]

Mike,

All I can say is NASTY, NASTY, NASTY!!!!

I'll call you tonight. Gears are out today.

I got your message today,thanks for the heads up. I named the cam
just that "Nasty" lol.....