PDA

View Full Version : Moes Traction bars

Blackturbotruck
09-25-2009, 10:59 PM
I have a set installed on the truck Few questions about these traction bars,
Should the snubber be tightened up to the spring?
Would these bars still cause axle hop?
would these adjusted right help move this truck off the line OR should i look into something else?
THEBIGCHEEZY
09-26-2009, 01:07 AM
sent u a pm, get to reading
JohnnyHemi
09-26-2009, 01:13 AM
how are those heads working for ya?
adamsredlines
09-26-2009, 01:55 AM
Caltracs
THEBIGCHEEZY
09-26-2009, 02:01 AM
Caltracs

even those need to be adjusted correctly, you cant just bolt them on and expect results
Onebadbee
09-26-2009, 02:19 AM
ill buy the traction bars off ya if you want cal tracs
adamsredlines
09-26-2009, 02:40 AM
even those need to be adjusted correctly, you cant just bolt them on and expect results

I agree but with proper adjustment I think the caltracs would far outperform slapper bars...and I think he's going to need all the help he can get with traction.
tajm
09-26-2009, 02:47 AM
The traction bars, while good in there own right are limited versus what you can do with the caltracs, you can actually dial them in pretty spot on if you're not a massive dumbfuck like i was
hdrolling
10-13-2009, 04:33 PM
Does anyone know what set of Caltracs to use? I don't see any for our trucks on there site?
dayton hemi
10-13-2009, 04:54 PM
Does anyone know what set of Caltracs to use? I don't see any for our trucks on there site?

go to www.moesperformance.com, he has them
hdrolling
10-13-2009, 05:52 PM
Those look like there for trucks with flip kits, will they work on a stock hight truck?
tajm
10-13-2009, 06:00 PM
There's a stock and a flip kit version.
hdrolling
10-13-2009, 06:30 PM
http://moesperformance.com/index.php?main_page=index&cPath=1_52
Still not seeing it, they have a set for 1500's with flip kits and one for the 2500 trucks.
This price is for Rams with FLIP KITS(rear springs under the axle), if your rear leaf springs are in the stock location(over the axle) you'll need to have special U bolts for an additional $40.


Is that the only kit, none that just work with the stock location?
dayton hemi
10-13-2009, 06:42 PM
This price is for Rams with FLIP KITS(rear springs under the axle), if your rear leaf springs are in the stock location(over the axle) you'll need to have special U bolts for an additional $40.

hope this helps
tajm
10-13-2009, 06:43 PM
Call bob. He'll set you up. I think about 90% of us have gone through moes. He'll get you squared away
Onebadbee
10-13-2009, 10:38 PM
didnt read entire post dumb mistake